Solvent Debinding of Injection Molded Fe-36% Ni with Use of Polyvinylbuthyral as Organic Binder
| Autor: | Katsuyoshi Saitou, Yukio Sasatani, Yasunari Kaneko, Yoshimitsu Kankawa |
|---|---|
| Rok vydání: | 1993 |
| Předmět: |
Materials science
Mechanical Engineering Extraction (chemistry) Metals and Alloys chemistry.chemical_element Industrial and Manufacturing Engineering Solvent debinding Solvent chemistry Volume (thermodynamics) Chemical engineering Scientific method Materials Chemistry Composite material Carbon Powder injection molding |
| Zdroj: | Journal of the Japan Society of Powder and Powder Metallurgy. 40:531-535 |
| ISSN: | 1880-9014 0532-8799 |
| Popis: | It is necessary to reduce the debinding time in powder injection molding process. Therefore, recently, there are methods such as ANAX process of removing the binders and the solvent debinding which can solve the problems mentioned above becomes to get much attention. Here discussed solvent debinding of injection molded Fe-36%Ni with use of polyvinylbuthyral as organic binder. The all organic binders of the componud dissolved into the solvent in this process, although the all ones of the compound could not be always dissolved into the solvent on conventional solvent de-binding process. In this process, the sintered bodys scarely containing carbon were produced under these conditions ;(1) extraction binder volume was at least 30vol% after the solvent debinding process, and (2) after solvent debinding process, the optimum maximun temperature on thermal debinding process was 350°C in air. |
| Databáze: | OpenAIRE |
| Externí odkaz: |
|