HF-HNO3-H2SO4/H2O Mixtures for Etching Multicrystalline Silicon Surfaces: Formation of NO2 +, Reaction Rates and Surface Morphologies

Autor: Marcus Lippold, Edwin Kroke, Sebastian Patzig-Klein
Rok vydání: 2011
Předmět:
Zdroj: Zeitschrift für Naturforschung B. 66:155-163
ISSN: 1865-7117
0932-0776
Popis: The reaction behavior of HF-HNO3-H2O etching mixtures, which are frequently used for texturing silicon surfaces, is significantly influenced by the addition of sulfuric acid. For high concentrations of sulfuric acid, nitronium ions NO2 + ions have been detected by means of 14N NMR spectroscopy, and results of Raman spectroscopic investigation have allowed the quantification of the nitronium ions. Maximum etching rates of 4000 - 5000 nm s−1 are reached for HF (40 %)-HNO3 (65%)-H2SO4 (97%) mixtures with w (40%-HF)/w (65%-HNO3) ratios of 2 to 4 and w (97%-H2SO4)2SO4 can be considered as a diluent. In order to investigate the influence of the sulfuric acid at constant HF and HNO3 quantities, fuming HNO3 (100 %) was used and the water in the mixtures successively replaced by H2SO4. A sudden increase of etching rates was found for sulfuric acid concentrations around 6 mol L−1 correlating with the characteristic color of the etching solutions. Decreased reaction rates at > 7 molL−1 H2SO4 are attributed to high solution viscosities and the formation of fluorosulfuric acid. Generally, in HF-HNO3-H2SO4/H2O etching mixtures a reduced dissociation of nitric acid, the formation of nitronium ions, the solubility of neutral nitrogen intermediates (e. g. NO2, N2O3), as well as other effects influence the attack of silicon surfaces. The structure of etched silicon surfaces was investigated by means of scanning electron (SEM) and laser scanning microscopy (LSM). The morphologies are influenced most significantly by the relative amounts of sulfuric acid. Unexpectedly, in nitronium ion-containing mixtures rough surfaces with pore-like etching pits are generated.
Databáze: OpenAIRE
Externí odkaz: