The effect of the microstructure on the antiferromagnetic to ferromagnetic transition in FeRh alloys
Autor: | K. Nenkov, Kornelius Nielsch, N. V. Baranov, T.G. Woodcock, Ludwig Schultz, Alisa Chirkova, F. Bittner |
---|---|
Rok vydání: | 2017 |
Předmět: |
Length scale
Materials science Polymers and Plastics Condensed matter physics Annealing (metallurgy) Transition temperature Metals and Alloys 02 engineering and technology 021001 nanoscience & nanotechnology Microstructure 01 natural sciences Electronic Optical and Magnetic Materials Lattice constant Ferromagnetism 0103 physical sciences Ceramics and Composites Magnetic refrigeration Antiferromagnetism 010306 general physics 0210 nano-technology |
Zdroj: | Acta Materialia. 131:31-38 |
ISSN: | 1359-6454 |
DOI: | 10.1016/j.actamat.2017.04.005 |
Popis: | A detailed study of Fe48Rh52 samples heat treated at different temperatures (1123 K, 1273 K and 1423 K) has been performed using scanning and transmission electron microscopy, energy dispersive x-ray spectroscopy, x-ray diffraction and magnetic measurements. The microstructure of all samples consisted of α′ (B2) and γ (A1) phases. Although the chemical composition, chemical ordering and the lattice parameter of the magnetic α′ phase in all three samples did not vary with heat treatment temperature, the temperature of the metamagnetic transition between the antiferromagnetic (AFM) and ferromagnetic (FM) states varied by 50 K. No gradients in chemical composition on a length scale larger than approximately 10 nm exist at the α′/γ phase boundaries. Due to the 1% volume expansion of the α′ phase, which occurs during the AFM-FM transition, stress fields around the α′/γ phase boundaries are expected. The composition, lattice parameter, size, shape and distribution of the γ phase was shown to change with heat treatment temperature. Finite element models indicated that these microstructural parameters influence the magnitude and extent of the stress fields at the phase boundaries. The variation in the transition temperature is therefore ascribed to the differences in the stress fields. |
Databáze: | OpenAIRE |
Externí odkaz: |