Study the Effect of Impact Angle on Slurry Erosion Wear of Four Different Ductile Materials
Autor: | Girish R. Desale, Bhushan D. Nandre |
---|---|
Rok vydání: | 2018 |
Předmět: |
Materials science
Ductile materials Scanning electron microscope Metallurgy chemistry.chemical_element 02 engineering and technology 021001 nanoscience & nanotechnology Copper Brass 020303 mechanical engineering & transports 0203 mechanical engineering chemistry visual_art Slurry Erosion visual_art.visual_art_medium 6063 aluminium alloy 0210 nano-technology Quartz |
Zdroj: | Materials Today: Proceedings. 5:7561-7570 |
ISSN: | 2214-7853 |
DOI: | 10.1016/j.matpr.2017.11.428 |
Popis: | The test rig fabricated for the present work has an ability to study the effect of orientation angle of erosion wear. The particles of Indian Standard sand (Quartz) selected as erodent for the present investigation because it is the most widely occurs in natural slurries. Experimental investigations on erosion behavior of ductile materials AISI SS304, AA 6063, Copper and Brass have been carried out using solid-water mixtures of the above erodent. The erosion wear due to solid-liquid mixture of IS Sand and tap water at different impact angles shows typical ductile erosion behavior for the selected materials. The maximum erosion is observed at 22.5° angle for AISI SS 304, 45 o for AA 6063, 22.5 o for Copper and 30 o for Brass. The minimum erosion is observed at 90 o orientation angle for all the materials. The eroded specimens were examined under the Scanning Electron Microscope (SEM) at minimum and maximum wear orientation angles. The SEM micrographs of eroded specimens depict the mechanism of material removal. |
Databáze: | OpenAIRE |
Externí odkaz: |