Cutting Path-associated Energy Consumption of Milling Machining Process
| Autor: | Mohamad Irwan Yahaya, Umi Fatihah Md Ali, Ahmad Faiz Zubair, M. M. Mahadzir, Abdul Rahman Hemdi, Muhamad Zameri Mat Saman, Safian Sharif, Melfa Yola, Rizal Mohamed Noor, Muhamad Fitri Othman |
|---|---|
| Rok vydání: | 2020 |
| Předmět: | |
| Zdroj: | IOP Conference Series: Materials Science and Engineering. 1003:012071 |
| ISSN: | 1757-899X 1757-8981 |
| DOI: | 10.1088/1757-899x/1003/1/012071 |
| Popis: | Manufacturing industries face numerous challenges, such as reducing their energy consumption. Minimising energy usage is one of the initiatives towards sustainable manufacturing. Many researches have studied the surface quality of machined part, but studies on energy consumption during machining process are limited. Different cutting paths operations may influence energy consumption during machining. The objective of this research was to investigate the effect of cutting tool paths and parameters on energy consumption during machining. Aluminium 6061 alloy was face-milled using high-speed steel tool with different tool paths, namely, morphed spiral, parallel and spiral paths. The design of experiment technique was applied to optimise the experimental work, and response surface methodology was used to analyse the experimental result. Results showed that feed rate is the most influential parameter on the energy consumption of machining. Machining energy models were also generated for morphed spiral, parallel and spiral cutting paths. The R 2 of each model was higher than 0.92, which indicates that the model equations are applicable in predicting the energy consumption of a milling operation. |
| Databáze: | OpenAIRE |
| Externí odkaz: |
|