Measurements and predictions of Middle Eastern heavy crude oil viscosity using compositional data
| Autor: | Adel M. Elsharkawy, Abdulrahim Kamel, Osamah Alomair |
|---|---|
| Rok vydání: | 2019 |
| Předmět: |
Petroleum engineering
02 engineering and technology 010502 geochemistry & geophysics Geotechnical Engineering and Engineering Geology Residual 01 natural sciences chemistry.chemical_compound Viscosity Fuel Technology 020401 chemical engineering chemistry Approximation error Heavy crude oil Petroleum Environmental science Model development 0204 chemical engineering Compositional data 0105 earth and related environmental sciences |
| Zdroj: | Journal of Petroleum Science and Engineering. 173:990-1004 |
| ISSN: | 0920-4105 |
| DOI: | 10.1016/j.petrol.2018.10.062 |
| Popis: | Determining the viscosity of heavy crude oil is important in the field of petroleum science, and reservoir simulators are routinely used to achieve this goal. In this study, a new empirical model for predicting heavy-oil viscosity is presented. The model was developed using the compositional data of 28 heavy crude oil samples from the Middle East. Viscosity measurements from 196 data points in the 20–80 °C temperature range were used during model development, and another 47 viscosity measurements were used to validate the model. The compositional and viscosity measurements were also used to evaluate the accuracy of previously published methods for predicting heavy-oil viscosities. These methods include corresponding-states models, residual viscosity models, and equations-of-state-based models. The study reveals that none of the previously published methods adequately predict the viscosities of heavy crude oils. On the other hand, it shows that the new empirical model is able to predict the viscosities of heavy oils with an average relative error of 3.8%. The proposed model is much simpler and easier to use than existing methods. |
| Databáze: | OpenAIRE |
| Externí odkaz: |
|
Full Text from ScienceDirect