| Popis: |
In this study, the effect of electroless Ni-P plating on the mechanical properties of Al-4%Ge alloy was investigated. As the results, the following points were clarified. (i) Tensile strength of the specimen subjected to the Ni-P plating after aging treatment or furnace cooling treatment was improved by about 10% in comparison to one of the non-processed specimens. (ii) Breaking elongation of the specimen subjected to the Ni-P plating after aging treatment showed no significant changes in comparison to one of the non-processed specimens. On the other hand, breaking elongation of the specimen subjected to Ni-P plating after a furnace cooling treatment was reduced to 70% in comparison to one of the non-processed specimens. (iii) Fatigue strength of the specimen subjected to the Ni-P plating after a furnace cooling treatment was overall reduced rather than one of non-processed specimens. (iv) Fatigue strength of the specimen subjected to the Ni-P plating after aging treatment was overall reduced, except for the low-stress region, rather than one of the non-processed specimens. (v) In the specimen subjected to Ni-P plating after a furnace cooling treatment or aging treatment, clear hydrogen desorption was recognized. On the other hand, there was only hydrogen desorption from a few of the non-processed specimens. Especially, it is considered that the poor fatigue strength and ductility of the plating materials are mainly due to the interaction between the surface precipitates and hydrogen gas. |
