An intensive study on the AC impedance mechanism of (AgPO3)1-x(Ag2SO4)x ionic glass systems under various conditions
| Autor: | Morad Etier, Atif Alkhazali, Fathy Salman, M. Aljarrah, Akram Alsukker |
|---|---|
| Rok vydání: | 2019 |
| Předmět: |
Diffraction
Materials science Mechanical Engineering Enthalpy Analytical chemistry Ionic bonding Activation energy Dielectric Conductivity Geotechnical Engineering and Engineering Geology Ion Mechanics of Materials Differential thermal analysis Electrical and Electronic Engineering Civil and Structural Engineering |
| Zdroj: | World Journal of Engineering. 16:477-486 |
| ISSN: | 1708-5284 |
| Popis: | Purpose The purpose of this study is to investigate the effect of the considerable Ag2SO4 content on the electrical and dielectric properties of (AgPO3)1−x(Ag2SO4)x ion glass system as well as to extract thermodynamic parameters. Design/methodology/approach Glass samples of (AgPO3)1-x(Ag2SO4)x with different mole ratios of Ag2SO4 [x = 0.00, 0.10,0.15,0.20 and 0.25] have been synthesized and used. X-ray diffraction and differential thermal analysis were used to investigate structural and thermal properties, and then the electrical characterizations of the bulk glasses were performed in different frequency and temperature range. Findings For different ratios of Ag2SO4 on AgPO3, the bulk conductivity is enhanced with increasing the amount of Ag2SO4 until the composition of x = 0.20, after which the conductivity decreases. The general behavior of both ε’ and ε” decreases with increasing frequency and increases with increasing temperature. Complex impedance analysis studied by Z‘−Z’ and Cole–Cole plot at different temperatures revealed that bulk resistance decreases with temperature. Originality/value The calculated values of activation free energy, enthalpy and entropy change for different compositions of (AgPO3)1-x(Ag2SO4)x showed an increase in activation energy and enthalpy when Ag2SO4 ratio is increased in (AgPO3)1-x(Ag2SO4)x composition up to 20%, and then there is a decrease in their values at x = 25%, which may be explained based on non-bridging oxygen. |
| Databáze: | OpenAIRE |
| Externí odkaz: |
|