Design of a compact storage ring for industrial research
Autor: | Shunji Yamamoto, Hirofumi Tanaka, K. Ikegami, T. Nakagawa, Matsuda Tetsuya, M. Iwamoto, Tetsuya Nakanishi, I. Kodera, Yamada Tadatoshi, Shuhei Nakata, S. Okuda, Chihiro Tsukishima, S. Nakamura |
---|---|
Rok vydání: | 1992 |
Předmět: | |
Zdroj: | Review of Scientific Instruments. 63:770-773 |
ISSN: | 1089-7623 0034-6748 |
DOI: | 10.1063/1.1142658 |
Popis: | An 800‐MeV compact storage ring is under construction for development of the technology of a compact ring and for research of x‐ray lithography and material analysis. Synchrotron radiation with a critical wavelength of 0.65 nm is emitted from a pair of superconducting bending magnets. A straight section of the ring has only one quadrupole magnet to make the smaller ring. An injection efficiency with a single kicker magnet is optimized by computer simulation. The kicker field strength and an injection angle are determined. A beam tracking with a numerical integration method shows this ring has a sufficiently wide dynamic aperture of ‖x‖≂30 mm and ‖y‖≂50 mm at the center of the bending magnet, which has βxmin and βymax. A 1‐GeV synchrotron is used as an injector, which has accelerated a beam up to 1 GeV. |
Databáze: | OpenAIRE |
Externí odkaz: |