| Autor: |
Ram Singh Rana, Inderdeep Singh, Tejas Pramod Naik, Kassahun Gashu Melese |
| Rok vydání: |
2021 |
| Předmět: |
|
| Zdroj: |
Lecture Notes in Mechanical Engineering ISBN: 9789813340176 |
| DOI: |
10.1007/978-981-33-4018-3_18 |
| Popis: |
Development of environment-friendly products with woven sisal/epoxy polymer composites necessitates joining operation. The design of the overlap joint plays a significant role in defining the performance of the adhesively bonded composite parts. In the current experimental investigation, the effect of drilled holes (in overlap area) on the load-carrying capacity of single-lap adhesively joined sisal-epoxy polymer composites has been studied. Four different hole arrangements have been compared. The holes were drilled in the adherends using a twist drill of 2 mm diameter. The mechanical properties of sisal-epoxy composite laminate were found to be better than the pure epoxy specimen. The specimens to be used as adherends were cut from a fabricated composite laminate as per ASTM D5868-01. The maximum shear strength and failure load were recorded for four- and eight-hole arrangements. The field emission scanning electron microscopy (FE-SEM) images of the fractured surface of sisal/epoxy composites after tensile testing reveal that relatively fewer fiber breakouts and de-bonding occurred indicating toward a strong adhesion between matrix and fiber reinforcement. |
| Databáze: |
OpenAIRE |
| Externí odkaz: |
|
