Mortar Based on Dune Sand and Substitute Wood Sawdust: Physico-Mechanical Characterization and Relationship Between Properties in Young Age
| Autor: | Assia Aidoud, Messaouda Bencheikh, Nacera Khaldi, Ilyess Mouhamed Ahmed Herga |
|---|---|
| Rok vydání: | 2021 |
| Předmět: | |
| Zdroj: | Annales de Chimie - Science des Matériaux. 45:447-453 |
| ISSN: | 1958-5934 0151-9107 |
| DOI: | 10.18280/acsm.450603 |
| Popis: | The South of Algeria is known for these immense sand dunes, which cover part of its territory (Sahara). The main objective of this study is the recovery of sands dune and wood waste (sawdust). The latter, which constitutes a potential source of several environmental and economic problems. The objective of this present work is to characterize the physico-mechanical properties at a young age of a dune sand-based mortar lightened by wood waste and to examine the suitability of using it for various applications in the construction of buildings. The improvement of the characteristics of these sands, which essentially formed of sand untapped to date and with the sole aim of enhancing this national sand wealth. The formulation of the mixtures is based on the substitution of dune sand by sawdust, at different weight contents 0, 10, 20 and 30%. The quantity of cement is fixed at 450 g. The results obtained show firstly that the introduction of sawdust improves the characteristics of the mixture (grain size tends to be spread out, reduction in densities), and secondly the physico-mechanical characteristics, especially at 30% substitution (reduction absorption by total immersion of 20.50%, porosity of 28.32%, wet density of 1.73% and dry density of 14.94% and increase in tensile strength of 61.43% and in compression of 63.87%). The effect of sawdust on the relationships between the properties of mortars was clearly noted either for the relationships between early strengths or between compressive and tensile strengths. |
| Databáze: | OpenAIRE |
| Externí odkaz: |
|