| Popis: |
Due to its dominance in the whole chip area, power and delay, the FPGA interconnect circuits are traditionally designed by full custom design method. We present an automated transistor-level sizing optimization methodology for GRM FPGA interconnect circuits. In order to get accurate and effective predicated area, the commonly used diffusion sharing, transistor folding and inputs sharing are considered. To get the accurate and effective delay value, we avoid the inaccuracy of using linear device model, and use two schemes to build wire model: the wire within a circuit and the wire between interconnect circuits. To decrease simulation time, we propose multi-thread acceleration method and the Minimum-Final-Delay (MFD) algorithm which optimizes interconnect circuit as a whole, not separated part. For switch box optimization, MFD algorithm requires 38% less number of simulations than COFFE's algorithm. We use 65nm CMOS process technology for evaluation. For different optimization strategy, we emphasize either representative critical path delay or overall layout area. Compare to full-custom design method, the global cost can be decrease by 3% ~ 17%. For different transistor sizing combinations, 10/50 threads can be ~ 9X/15X faster than single-thread. Compared with the manual design method, our optimization methodology explores larger design space, and it decreases the circuit design optimization time from months to hours. |
