| Autor: |
R.E.A Pallewela, Nimali T. Medagedara, P. D. S. H. Gunawardane |
| Rok vydání: |
2019 |
| Předmět: |
|
| Zdroj: |
RoboSoft |
| DOI: |
10.1109/robosoft.2019.8722756 |
| Popis: |
This paper focuses on investigating the delays of a tele-operable bilateral system design with a soft actuator. The setup we have used is governed by realizing control signals obtained from hand gestures through the Internet, over a long distance. The control signals are necessary to be received promptly to the controller and lags are important to minimize in establishing real time control of the system. Slave side is a soft actuator made out of an elastomer material which is controlled by pneumatic actuation. Solenoid valves are used to control the actuator. Through out the experimentation, we have assumed the actuator to follow the Neo Hookean (hyper-elastic model) behavior. A data glove is used to realize the bending angle and forces generated during soft grasping by the operator's finger. Then these control signals are transmitted to the slave side using Internet. These signals are used to control the air pressure of the cavities in soft actuator. A closed loop system is established by attaching a flex sensor in the soft actuator. Message Queuing Telemetry Transport (MQTT) server is used to deliver the data packets which has control data. Several experimentations are carried out in different geographical locations to study the behavior and delays associated with the setup. We have mainly encountered delays due to communication (mainly Round Trip Delay Time (RTT)), elastic saturation and minor delays due to various other factors. This paper studies and discusses delays and their possible causes. We have compared the elastic saturation delays obtained by the finite element model and delays measured by experiments. Final results of the study revealed the importance of considering these delay factors in design level to establish real-time control in soft actuator systems. |
| Databáze: |
OpenAIRE |
| Externí odkaz: |
|
