Fabrication and Mechanical Characterization of Jute Fabrics: Reinforced Polyvinyl Chloride/Polypropylene Hybrid Composites

Autor:	Arifuzzaman Tapash, Farah Nigar, Haydar U. Zaman, Mubarak A. Khan, A. I. Mustafa, Rafiqul Islam, Towhidul Islam, S. Saha, Nusrat Sharmin, Ruhul A. Khan, Kamol Dey
Rok vydání:	2011
Předmět:	Polypropylene Materials science Polymers and Plastics General Chemical Engineering Composite number Compression molding Young's modulus Analytical Chemistry symbols.namesake chemistry.chemical_compound Polyvinyl chloride Flexural strength chemistry Ultimate tensile strength symbols Composite material Natural fiber
Zdroj:	International Journal of Polymeric Materials. 60:576-590
ISSN:	1563-535X 0091-4037
DOI:	10.1080/00914037.2010.531822
Popis:	Jute fabrics such as reinforced polyvinyl chloride (PVC), polypropylene (PP), and a mixture of PVC and PP matrices-based composites (50 wt% fiber) were prepared by compression molding. Tensile strength (TS), bending strength (BS), tensile modulus (TM), and vbending modulus (BM) of jute fabrics' reinforced PVC composite (50 wt% fiber) were found to be 45 MPa, 52 MPa, 0.8 GPa, and 1.1 GPa, respectively. The effect of incorporation of PP on the mechanical properties of jute fabrics' reinforced PVC composites was studied. It was found that the mixture of 60% PP and 40% PVC matrices based composite showed the best performance. TS, BS, TM, and BM for this composite were found to be 65 MPa, 70 MPa, 1.42 GPa, and 1.8 GPa, respectively. Degradation tests of the composites for up to six months were performed in a soil medium. Thermo-mechanical properties of the composites were also studied.
Databáze:	OpenAIRE
Externí odkaz:	https://explore.openaire.eu/search/publication?articleId=doi_________::a11a65d57f7fc6c91aed3b880161e513 https://doi.org/10.1080/00914037.2010.531822 Zobrazit plný text záznamu Plný text ve formátu PDF Plný text ve formátu HTML
Nepřihlášeným uživatelům se plný text nezobrazuje	K zobrazení výsledku je třeba se přihlásit.