Design of experiments optimisation study on the fat coating machine for extruded fish feed
| Autor: | Bamgboye Ai, Ojekunle Ei, O. B. Oduntan |
|---|---|
| Rok vydání: | 2018 |
| Předmět: |
0301 basic medicine
Materials science Pellet size Design of experiments 04 agricultural and veterinary sciences engineering.material Oil absorption Commercial fish feed 03 medical and health sciences 030104 developmental biology Coating 040102 fisheries Mechanical efficiency engineering 0401 agriculture forestry and fisheries Fish Composite material |
| Zdroj: | Horticulture International Journal. 2 |
| ISSN: | 2576-4462 |
| DOI: | 10.15406/hij.2018.02.00073 |
| Popis: | Background The fat coating machine has been evaluated in several studies evaluating its impact on production The question remained as to what speed the various components of the fat coater should be operated at to optimize performance Therefore the influence of coating speed rpm at different time minutes on extruded fish size mm was studied using fat coating machine This article presents the results of an optimisation study conducted on a fat coating machine showing that an increase in pellet size resulted in a decrease in oil absorption and an increase in coating time and speed resulted in an increase in oil absorption Extrudates size and coating time were the two factors that significantly affected the oil absorption rate of the extruded feed The optimum point of oil absorption was achieved after minutes using a mm extrudates size resulting in a machine efficiency of The coated extrudates were checked for physical parameters The equipment performance was carried out to demonstrate the efficiency of the equipment and ended with satisfactory results |
| Databáze: | OpenAIRE |
| Externí odkaz: |
|