| Autor: |
Nor Irwin Basir, Mohammad Zulfikar Ishak, M. N. Murat, Muhamad Azman Miskam, Zainal Alimuddin Zainal Alauddin |
| Rok vydání: |
2013 |
| Předmět: |
|
| Zdroj: |
2013 IEEE Conference on Clean Energy and Technology (CEAT). |
| DOI: |
10.1109/ceat.2013.6775651 |
| Popis: |
The wet impregnation method for catalytic micro-combustor was characterized by using palladium as a catalyst. The main purpose of this study is to increase the surface porosity of the catalyst support. A high surface porosity indicates that a high amount of catalyst was deposited within the surface areas. The performance of the catalytic micro-combustor improves with increasing catalytic surface area. The stainless steel catalyst support was treated with sulfuric acid solution containing polyvinyl (1.19 wt%) and propargyl alcohol (0.98 wt%). Combustion test was performed using LPG-air to test the performance of the catalyst. The surface support treated with polyvinyl (PVA) showed a higher surface porosity and combustion blow-out limit compared with propargyl alcohol. The combustion mode changes from surface to submerged combustion after the catalyst was deposited in the support surface. |
| Databáze: |
OpenAIRE |
| Externí odkaz: |
|
