Application of the Tensile Test with a CCD Camera to Assess the Adhesion of Scale to Si-Containing Hot-Rolled Steels
| Autor: | Thanasak Nilsonthi, Wannapha Issaard |
|---|---|
| Rok vydání: | 2017 |
| Předmět: |
010302 applied physics
Materials science Scale (ratio) Silicon Ccd camera Mechanical Engineering Metallurgy Oxide chemistry.chemical_element 02 engineering and technology Adhesion 021001 nanoscience & nanotechnology 01 natural sciences Hot rolled chemistry.chemical_compound chemistry Mechanics of Materials 0103 physical sciences General Materials Science Composite material 0210 nano-technology Tensile testing |
| Zdroj: | Key Engineering Materials. 728:26-30 |
| ISSN: | 1662-9795 |
| DOI: | 10.4028/www.scientific.net/kem.728.26 |
| Popis: | The tensile test has been developed to assess scale adhesion of hot-rolled steel. The tensile testing machine was equipped with the CCD camera to follow the failure of scale during straining. The hot-rolled steel with different silicon content was used to investigate the scale adhesion behavior. The result is shown the mechanical adhesion energy of scale formed on the hot-rolled steel with higher Si contain was 115 J.m-2, higher than the hot-rolled steel with lower Si contain which was 56 J.m-2. This might be due to the presence of oxide containing Si at interface which promoted adhesion, implying that longer time for descaling would be required. |
| Databáze: | OpenAIRE |
| Externí odkaz: |
|