A transparent conductive oxide electrode with highly enhanced flexibility achieved by controlled crystallinity by incorporating Ag nanoparticles on substrates
| Autor: | Gun Hwan Lee, Ross E. Triambulo, Hahn Gil Cheong, In Sook Yi, Jinwoo Park |
|---|---|
| Rok vydání: | 2015 |
| Předmět: |
chemistry.chemical_classification
Materials science Mechanical Engineering Metals and Alloys Oxide Nanotechnology Polymer Amorphous solid Indium tin oxide Crystallinity chemistry.chemical_compound chemistry Chemical engineering Mechanics of Materials Materials Chemistry Polymer substrate Polyimide Transparent conducting film |
| Zdroj: | Journal of Alloys and Compounds. 620:340-349 |
| ISSN: | 0925-8388 |
| Popis: | We report the synthesis of highly flexible indium tin oxide (ITO) on a polymer substrate whose surface was engineered by oxide-coated Ag nanoparticles (AgNPs) smaller than 20 nm in diameter. Polyimide (PI) substrates were spin coated with Ag ion ink and were subsequently heat treated to form AgNP coatings. The Ag oxide was formed by O 2 plasma treatment to reduce the light absorbance by AgNPs. ITO was dc magnetron sputter-deposited atop the AgNPs. The ITO on the AgNPs was crystalline grown primarily with (2 2 2) growth orientation. This contrasts to the typical microstructure of ITO grown on the polymer, which is that growing c -ITO nucleates are embedded in an amorphous ITO ( a -ITO) matrix like a particulate composite. The surface roughness of ITO on AgNPs was as small as the ITO on PI without AgNPs. The crystalline nature of the ITO on the AgNP-coated polymer resulted in the decrease of electric resistivity ( ρ ) by 65% compared to that of ITO on the bare PI. Furthermore, an electric resistivity change (Δ ρ ) of the ITO on the AgNPs was only 8% at a bending radius ( r b ) down to 4 mm, whereas the ITO on the non-coated polymer became almost insulating at an r b of 10 mm, owing to a drastic increase in the number of cracks. To validate the potential application in the displays, flexible organic light emitting diodes (f-OLEDs) were fabricated on the ITO on AgNPs and the performances was compared with the f-OLED on ITO on the bare PI. |
| Databáze: | OpenAIRE |
| Externí odkaz: |
|
Full Text from ScienceDirect