Investigation on mechanical properties of Ti-6al-4 V & SS-304L frictional welding process
| Autor: | R. Ramesh Kumar, V.K. Bupesh Raja, Mathew Alphonse, J. M. Babu, K. Palanikumar, Ghantasala Pranav Bhargav |
|---|---|
| Rok vydání: | 2021 |
| Předmět: |
010302 applied physics
Diffraction Work (thermodynamics) Materials science Process (computing) Rotational speed 02 engineering and technology 021001 nanoscience & nanotechnology 01 natural sciences Forging Corrosion Residual stress 0103 physical sciences Composite material 0210 nano-technology Joint (geology) |
| Zdroj: | Materials Today: Proceedings. 46:3561-3565 |
| ISSN: | 2214-7853 |
| DOI: | 10.1016/j.matpr.2021.01.053 |
| Popis: | Basic frictional contact joints and mechanical properties list of corrosion resistance, hardness, and mechanical behaviours are investigated from this research work. Different rotational speed based on residual stresses is calculated in the main purpose of this research work process. Varied rotational speeds are used in this process like 500, 700 and 800 rpm respectively. While increasing rotational speed at the same time axial load also increased gradually. Residual stress evaluation results also made in the center of joints. X-ray diffraction method carried out the process of different joint samples and residual stresses. The experimental results are identified the D-spacing, Residual stresses and electron microscope. The graphical representation results were analyzed in the process of friction pressure controlled by forging time. Hence these experimental work results can be used in different aerospace applications and automobile industries where the subject to be maintained in the temperatures. |
| Databáze: | OpenAIRE |
| Externí odkaz: |
|
Full Text from ScienceDirect