| Popis: |
The microcompression method was used to investigate the compressive plastic flow behavior of nanolayered crystalline/amorphous (C/A) Cu/Cu–Zr micropillars within wide ranges of intrinsic layer thicknesses (h ∼ 5–150 nm) and extrinsic sample sizes (350–1425 nm) with the goal of revealing the intrinsic size effect, extrinsic size effect and their interplay on the plastic deformation behavior. The nanolayered C/A micropillars exhibited deformation behaviors of strain-hardening followed by strain-softening that were dependent on the thickness of the layers. At h ⩽ 10 nm, the strain-softening is related to shear deformation that is caused by fractures in the amorphous layers. At h > 10 nm, however, the strain-softening is related to the reduction in dislocation density caused by dislocation absorption. Correspondingly, the deformation mode of the C/A micropillars transitioned from homogeneous-like to shear band type as h decreased to the critical value of ∼10 nm, which is indicative of a significant intrinsic size effect. The extrinsic size effect on the plastic deformation also became remarkable when h was less than ∼10 nm, and the interplay between the intrinsic and extrinsic size effects leads to an ultrahigh strength of ∼4.8 GPa in the C/A micropillars, which is close to the ideal strength of Cu and considerably greater than the ideal strength of the amorphous phase. The underlying strengthening mechanism was discussed, and the transition in deformation mode was quantitatively described by considering the strength discrepancy between the two constituent crystalline and amorphous layers at different length scales. |
Full Text from ScienceDirect