Experimental studies on tungsten-armour impact on nuclear responses of solid breeding blanket
| Autor: | Makoto Nakao, Naoyoshi Kubota, Yury Verzilov, Masayuki Wada, Takeo Nishitani, Kentaro Ochiai, Michinori Yamauchi, Satoshi Sato, Keitaro Kondo |
|---|---|
| Rok vydání: | 2005 |
| Předmět: | |
| Zdroj: | Nuclear Fusion. 45:656-662 |
| ISSN: | 1741-4326 0029-5515 |
| DOI: | 10.1088/0029-5515/45/7/014 |
| Popis: | In order to experimentally evaluate the tungsten armour impact on tritium production of the solid breeding blanket being developed by JAERI for tokamak-type DEMO reactors, neutronics integral experiments have been performed using DT neutrons at the Fusion Neutron Source facility of JAERI. Solid breeding blanket mockups relevant to the DEMO blanket have been applied in this study. The mockups are made of a set of layers consisting of 0–25.2 mm thick tungsten, 16 mm thick F82H, 12 mm thick Li2TiO3 and 100–200 mm thick beryllium with a cross-section of 660 × 660 mm in maximum. Pellets of Li2CO3 are embedded in the Li2TiO3 layers to measure the tritium production rate. By installing the 5 mm, 12.6 mm and 25.2 mm thick tungsten armours, the sum of the integrated tritium productions at the pellets are reduced by about 2.1%, 2.5% and 6.1% relative to the case without the armour, respectively. Numerical calculations have been conducted using the Monte Carlo code. In the case of the mockups with the tungsten armour, calculation results for the sum of the integrated tritium productions agree well with the experimental data within 4% and 19% in the experiments without and with a neutron reflector, respectively. |
| Databáze: | OpenAIRE |
| Externí odkaz: |
|