Influence of slight misorientations of r ‐plane sapphire substrates on the growth of nonpolar a ‐plane GaN layers via HVPE
Autor: | Stephan Schwaiger, Ferdinand Scholz, Thomas Wunderer, Frank Lipski |
---|---|
Rok vydání: | 2010 |
Předmět: | |
Zdroj: | physica status solidi c. 7:2069-2072 |
ISSN: | 1610-1642 1862-6351 |
DOI: | 10.1002/pssc.200983514 |
Popis: | We have investigated the growth of nonpolar GaN templates by hydride vapor phase epitaxy (HVPE). This includes a systematic study of misoriented r-plane sapphire wafers with a miscut angle up to ±1° towards the c-axis of the crystal as starting substrates. Starting with an AlN nucleation layer approximately 3.3 μm of nonpolar a-plane GaN are grown by metalorganic vapor phase epitaxy (MOVPE). The subsequent growth by HVPE was optimized to obtain flat and homogeneous layers with very good crystal quality. This was illustrated by very small full widths at half maximum (FWHM) of x-ray rocking curve (XRC) measurements of less than 500 arcsec. The surface quality was evaluated by scanning electron microscopy (SEM) and optical phase contrast microscopy showing a high number of surface defects (pits) for the samples with a high miscut towards the positive direction whereas a slight miscut of +0.5° reduces the surface roughness. Additionally, smallest XRC FWHM values have been obtained for this particular miscut. A miscut towards negative directions results in lower crystalline quality and the surfaces shows hillock-like features. All GaN layers on misoriented substrates are tilted with respect to the substrate. Their tilt angle increases with the miscut angle. Its direction is opposed to the miscut of the sapphire. (© 2010 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim) |
Databáze: | OpenAIRE |
Externí odkaz: |