| Autor: |
Yu Sun, Bao Sheng Jin, Ya Ji Huang, Ji Qiang Jia, Yan Yan Wang, Wu Zuo |
| Rok vydání: |
2013 |
| Předmět: |
|
| Zdroj: |
Advanced Materials Research. :2885-2893 |
| ISSN: |
1662-8985 |
| DOI: |
10.4028/www.scientific.net/amr.726-731.2885 |
| Popis: |
Pyrolysis of sewage sludge for the fixed bed were investigated at different final temperatures (300-900 °C) to acquire distribution and characteristics of pyrolysis products. The mass balance was established on base of continuous on-line measurement of gases and integration of gas compounds to give a more accurate reflection on the yields distribution. It was observed that at low temperatures the liquid was the main product with maximum yield of 57 wt%(daf) at 500°C and the gas composition was mainly CO2. Under the condition of a higher pyrolysis temperature (above 600°C), secondary reaction occurred among phase of solid, liquid and gas and generated more CO and H2. From the perspective of energy utilization and accumulation of heavy metals, a lower temperature no more than 600°C is suitable for sewage sludge pyrolysis. |
| Databáze: |
OpenAIRE |
| Externí odkaz: |
|
