Seismic Dynamic Model Tests on Tunnel Lining Passing through the Fault
| Autor: | Jia Mei Zhou, Qi Yan, Guo Wang Meng |
|---|---|
| Rok vydání: | 2013 |
| Předmět: |
geography
Engineering geography.geographical_feature_category business.industry Stiffness Boundary (topology) General Medicine Structural engineering Fault (geology) Scale factor Collision Acceleration medicine Earthquake shaking table Table (landform) Geotechnical engineering medicine.symptom business |
| Zdroj: | Applied Mechanics and Materials. :1732-1737 |
| ISSN: | 1662-7482 |
| DOI: | 10.4028/www.scientific.net/amm.368-370.1732 |
| Popis: | The seismic behaviors of tunnel lining passing through the fault are studied by means of large-scale shaking table tests under the load of Wolong-seismic wave. The model tunnel is installed into a model box with a length of 3.65 m, width of 1.5 m and height of 1.8 m. The sizes of model and prototype tunnel are designed by using the similar principles with a scale factor of 1:30. As the result shows, under the seismic force load, the tunnel lining has a delay of responding the seismic force when it crosses the faults geological belt. The time is 0.085seconds. Model box amplified table acceleration, the farther the distance from shaking table is, the more obvious amplification is. The seismic force load is horizontal, but the resistance applied by the faults geological belt is weak, resulting relative motion, collision, extrusion etc. so, the tunnel lining appears cracks. It is in accord with investigation conclusions of Wenchuan earthquake. Article also aims at some problems in the experiment such as: boundary effect, model box stiffness etc, and gives some suggestions. |
| Databáze: | OpenAIRE |
| Externí odkaz: |
|