| Autor: |
Hui Qin Cao, Xin Ju Zhang, Xiu Hong Ma, Fu Xiang Zhang |
| Rok vydání: |
2013 |
| Předmět: |
|
| Zdroj: |
Applied Mechanics and Materials. 404:678-681 |
| ISSN: |
1662-7482 |
| DOI: |
10.4028/www.scientific.net/amm.404.678 |
| Popis: |
There are three work posts in this warm extruder: upsetting station backward extrusion station and blanking station. They work continuously. The manipulator is mainly used to passing artifacts from one station to another. The warm extrusion forming process manipulator for steel connecting sleeve typically was designed to reduce labor intensity and enhance production automation level. The machines structure and working principle were described. In the same time, the machine control system that adopts the PLC programmable controller can simplify the control system, and its reliability strengthens further. Practices show that the strapping machine has the advantages of simple structure, high efficiency, low cost and small vibrating noise. |
| Databáze: |
OpenAIRE |
| Externí odkaz: |
|
