Syngas production by dry reforming of methane using lyophilized nickel catalysts

Autor: Agenor De Noni Junior, Camilla Daniela Moura-Nickel, Elaine Virmond, Camila Gaspodini Tachinski, Richard Landers, Humberto Jorge José, Regina de Fátima Peralta Muniz Moreira, Michael L. Peterson
Rok vydání: 2019
Předmět:
Zdroj: Chemical Engineering Science. 205:74-82
ISSN: 0009-2509
DOI: 10.1016/j.ces.2019.04.035
Popis: In this work, lyophilized nickel catalysts were synthesized and compared with a commercial catalyst (CCom) in the process of dry reforming of methane. Ni-Al2O3 catalysts were prepared by epoxide-initiated gelation method and lyophilized with different percentage of active phase: 5 wt% (LNi5), 10 wt% (LNi10), 15 wt% (LNi15) and 20 wt% (LNi20). The catalysts were characterized by physical nitrogen adsorption, infrared spectroscopy, X-ray diffractometry, scanning electron microscopy and X-ray photoelectron spectroscopy. The catalytic tests were performed at 600 °C, 700 °C and 800 °C. All catalysts were active in the reforming reactions except the LNi5 and CCom catalysts at temperatures of 600 °C and 700 °C. The LNi10 catalyst at 800 °C has presented the highest syngas production. The CCom showed the highest carbon deposition at 600 °C with 2.26 mg which represents 4.52% of the initial weight of the catalyst. Increasing the nickel content from 5 wt% to 10 wt% resulted in a syngas gain of 1.31 μmol/min, 0.86 μmol/min and 1.25 μmol/min at 600 °C, 700 °C and 800 °C, respectively. The increase of the active phase from 10 wt% to 15 wt% and 20 wt% did not present significant effects in the syngas production. The lyophilization process in the drying stage of the catalyst has proved to be quite satisfactory in the dry reforming of methane.
Databáze: OpenAIRE
Externí odkaz: