Finite element analysis of CFRP-externally strengthened reinforced concrete beams subjected to three-point bending
Autor: | Waleed Abed Jasim, Farid Bouziadi, Abdesselam Zergua, Sabiha Barour |
---|---|
Rok vydání: | 2019 |
Předmět: |
Materials science
business.industry Three point flexural test Mechanical Engineering Modulus Context (language use) Structural engineering Geotechnical Engineering and Engineering Geology Finite element method Compressive strength Flexural strength Mechanics of Materials Electrical and Electronic Engineering business Beam (structure) Civil and Structural Engineering Parametric statistics |
Zdroj: | World Journal of Engineering. 17:183-202 |
ISSN: | 1708-5284 |
DOI: | 10.1108/wje-04-2019-0121 |
Popis: | PurposeThis paper aims to develop a non-linear finite element model predicting the response of externally strengthened beams under a three-point flexure test.Design/methodology/approachThe ANSYS software is used for modeling. SOILD65, LINK180, SHELL181 and SOLID185 elements are used, respectively, to model concrete, steel reinforcement, polymer and steel plate support. A parametric study was carried out. The effects of compressive strength, Young’s modulus, layers number and carbon fiber-reinforced polymer thickness on beam behavior are analyzed. A comparative study between the non-linear finite element and analytical models, including the ACI 440.2 R-08 model, and experimental data is also carried out.FindingsA comparative study of the non-linear finite element results with analytical models, including the ACI 440.2 R-08 model and experimental data for different parameters, shows that the strengthened beams possessed better resistance to cracks. In general, the finite element model’s results are in good agreement with the experimental test data.Practical implicationsThis model will predict the strengthened beams behavior and can describe the beams physical conditions, yielding the results that can be interpreted in the structural study context without using a laboratory testing.Originality/valueOn the basis of the results, a good match is found between the model results and experimental data at all stages of loading the tested samples. Crack models obtained in the non-linear finite element model in the beams are also presented. The submitted finite element model can be used to predict the behavior of the reinforced concrete beam. Also, the comparative study between an analytical model proposed by of current code of ACI 440.2 R-08 and finite element analysis is investigated. |
Databáze: | OpenAIRE |
Externí odkaz: |