Pyrolysis-gas chromatography/mass spectrometry to identification of the solid waste characteristic of imported polyamide recycled plastics
Autor: | Lin Zhenxing, Yuan Lifeng, Luo Chuan, Wang Hao, Xu Shanhao, Zhang Ying |
---|---|
Rok vydání: | 2021 |
Předmět: | |
Zdroj: | IOP Conference Series: Earth and Environmental Science. 621:012038 |
ISSN: | 1755-1315 1755-1307 |
DOI: | 10.1088/1755-1315/621/1/012038 |
Popis: | An analytical method for the determination of content of PA66 in PA6/PA66 blends by pyrolysis-gas chromatography/mass spectrometry (Py-GC/MS) with silica (SiO2) as dispersant was established. After the sample was frozen and crushed into powder, silica was used as a solid dispersant mix with the sample, and the mixtures was injected. At 600°C cracking temperature, the corresponding cracking chromatogram was obtained, and the characteristic of PA66 on the cracking chromatogram of PA6/PA66 blend, the cyclopentanone, was selected as the quantitative peak to calculate the mass of PA66 in the PA6/PA66 blend. The content of PA66 in the dispersion was in the range of 0.50 g/kg ∼ 100 g/kg, and the results had a good linear relationship. The detection limit of the PA66 was 0.50 g/kg (the corresponding PA66:PA6 ratio was 0.5:99.5). The PA6/PA66 samples with known mixing ratio were measured, and the recovery of the results was 95.7%∼102.1%, and the relative standard deviation(RSD) was 1.6%∼5.9% (n=3). It can accurately determine the content of PA66 in PA6/PA66 blends, and provide technical support for the attribute identification of related imported recycled plastic solid wastes. Introduction. Py-GC/MS; Recycled polyamide; Solid dispersant; Solid waste Characteristic identification |
Databáze: | OpenAIRE |
Externí odkaz: |