Effect of clay presence and solvent dose on hybrid solvent-steam performance
| Autor: | Raphael Coelho, Ian Phillip Benson, Cesar Ovalles, Berna Hascakir |
|---|---|
| Rok vydání: | 2017 |
| Předmět: |
Work (thermodynamics)
Petroleum engineering 020209 energy food and beverages 02 engineering and technology Geotechnical Engineering and Engineering Geology complex mixtures Miscibility humanities Volumetric flow rate Solvent Viscosity chemistry.chemical_compound Fuel Technology 020401 chemical engineering Chemical engineering chemistry Asphalt Propane 0202 electrical engineering electronic engineering information engineering 0204 chemical engineering Asphaltene |
| Zdroj: | Journal of Petroleum Science and Engineering. 150:203-207 |
| ISSN: | 0920-4105 |
| DOI: | 10.1016/j.petrol.2016.12.006 |
| Popis: | The goal of solvent-steam-flooding is enhancing bitumen displacement by the simultaneous development of solvent miscibility and reduction of oil viscosity. Though this strategy reduces greenhouse gas emissions, solvents are generally expensive. Additionally, bitumen recovery performance is affected by oil/solvent/clay/asphaltene interactions on the pore-scale level. Therefore, solvent dosage and type must be optimized to maximize recovery, while minimizing environmental impacts and operational costs. To investigate the performance of solvent-steam processes, six-core flooding experiments were conducted on a Canadian bitumen sample with 8.8°API and 54,000 cP at room temperature. Propane-steam flooding was tested and compared to steam-flooding. The effect of reservoir clays is studied by carrying out experiments in the presence and absent of clays. Three propane flow rates were tested to examine the impact of solvent dosages. After the experiments, asphaltene, clay, viscosity, and water contents in produced oil were measured. The results indicated that propane-steam flooding increased recovery factors, accelerated production, and had higher quality oil than steam-flooding. The lowest propane flow rate (1:9 v/v) improved oil recovery by 23%, indicating that higher solvent concentration may not be needed. This work reveals that bitumen microscopic displacement efficiency is enhanced by the addition of solvent to steam flooding. It is proposed that pore-scale interactions, solvent flow rate, and clays also highly influence produced oil quality and oil recovery rates. |
| Databáze: | OpenAIRE |
| Externí odkaz: |
|
Full Text from ScienceDirect