Potential of Copper-Based Oil Soluble Catalyst for Improving Efficiency of In-Situ Combustion Process: Catalytic Combustion, Catalytic In-Situ Oil Upgrading, and Increased Oil Recovery
| Autor: | Kamil Sadikov, Chengdong Yuan, Seyedsaeed Mehrabi-Kalajahi, Dmitrii A. Emelianov, Nikolay O. Rodionov, Mikhail A. Varfolomeev, M. I. Amerkhanov |
|---|---|
| Rok vydání: | 2019 |
| Předmět: |
Oil soluble
In situ Materials science 020209 energy chemistry.chemical_element Catalytic combustion 02 engineering and technology Copper Catalysis 020401 chemical engineering Chemical engineering chemistry Scientific method 0202 electrical engineering electronic engineering information engineering Enhanced oil recovery 0204 chemical engineering Combustion front |
| Zdroj: | Day 3 Tue, October 15, 2019. |
| Popis: | In-situ combustion (ISC) is a promising thermal enhanced oil recovery (EOR) method for heavy oils. However, its field application is still limited due to difficulty in ignition, low combustion efficiency, unstable combustion front, etc. To improve the success rate of ISC process, we investigated the effectiveness of copper-based oil soluble catalyst for catalyzing combustion and in-situ upgrading of heavy oils. High-pressure differential scanning calorimetry (HP-DSC) and TGA were used to investigate the effect of catalyst on the thermochemistry (onset temperature, temperature range of reaction interval, heat effect, etc.) and kinetic parameters of combustion process. A Porous medium thermo-effect cell (PMTEC) was designed to study the catalytic combustion of heavy oil in porous media under air flow. And, a visual combustion tube (VCT) was developed to study the catalytic effect of catalyst on the ISC process, including improving combustion front propagation, in-situ upgrading of heavy oils, and oil recovery. HP-DSC results showed that copper-based oil soluble catalyst significantly shifted the low-temperature oxidation (LTO), transition stage (FD), and high-temperature oxidation (HTO) into lower temperature ranges. Especially for HTO, the end temperature was decreased about 120 °C. It was finished at a narrower temperature region with a higher heat flow, which implies that the combustion efficiency of HTO was greatly improved. TG-DTG data also showed the combustion reaction was transferred into lower temperatures. In addition, from TG-DTG and kinetic data, it can be concluded that the catalyst significantly reduced the activation energy in FD and HTO stage, which thus decreases the reaction barriers between FD and HTO and increases the continuity of reactions between FD and HTO. PEMTC experiments also showed that the ignition temperature of heavy oil combustion in porous media in airflow was decreased about 46 °C by copper-based catalyst. VCT experiments indicated that in the presence of copper-based oil soluble catalyst, combustion front propagate faster, oil recovery was 10% higher than without catalyst, and a deep in-situ oil upgrading was achieved with a significant viscosity reduction (9 times lower) and increase of saturates content (especially alkanes with lower carbon number C11-C17). All these results showed that copper-based oil soluble catalyst has a great potential in improving the efficiency of ISC process and in-situ oil upgrading. Its application can help to improve the success rate and wide application of ISC process for heavy oil recovery, which will promote the highly efficient development of heavy oil resources. |
| Databáze: | OpenAIRE |
| Externí odkaz: |
|