| Autor: |
Hamad A Khairy, Ahmed M Soliman, Islam M Elabsy, Syofvas Syofyan, Andrey Nestyagin, Tareq A Al-Shabibi, Tengku Mohd Fauzi, Viraj Nitin Telang, Javier A Fraquet, Sefer B Coskun |
| Rok vydání: |
2021 |
| Zdroj: |
Day 2 Tue, November 16, 2021. |
| DOI: |
10.2118/207388-ms |
| Popis: |
Downhole reservoir fluids sampling in tight formations has been a continuous challenge due to various reasons. The paper presents a technique of successfully collecting downhole fluid samples for first time in ultra-low permeability reservoir having a history of deep invasion. This became possible by initiating micro-scale fractures followed by pumping out for sampling. Using this technique, downhole formation fluid samples were collected, clean-up time was optimized, in addition to acquiring in-situ stress information during the process. A preliminary assessment was performed using open hole formation evaluation logs and pore pressure measurements to identify the most suitable zones for stress measurement and fluid sampling. Single packer sleeve fracture initiation tests were performed to break down the high stress dense layers. In the reservoir rock, the stress measurement involving initiation of a micro-scale fracture was followed by pumping out formation fluid from the fractured zones to collect clean formation fluid samples. The formation breakdown and fracture closure pressure were measured successfully to calibrate minimum and maximum lateral tectonic strains which were valuable inputs for designing the hydraulic fracturing treatment. In the offset wells, fluid sampling attempts from this zone of interest have proven unsuccessful after multiple attempts involving pumping out over 300 liters because of the high depth of invasion leading to a thick flushed zone around the wellbore. The process of initiating micro-scale fractures followed by pumping out provided a high permeability flow channel for efficient fluid sampling. The near wellbore fractures resulted in pumping at higher rates and reaching the higher oil saturated zones of this deeply invaded formation. Hence, formation fluid samples were successfully collected in spite of the low permeability and high invasion typically encountered in this reservoir. Unlike the unsuccessful sampling attempts in the offset wells, this technique of initiating micro-scale fractures in the reservoir rock followed by pumping out helped in collecting formation fluid samples. This technique can be used to collect reservoir fluid samples from micro-Darcy formations and unconventional reservoirs by improving the flow through the induced fractures and thereby reducing the uncertainty that may persist in failing to collect samples from such zones. |
| Databáze: |
OpenAIRE |
| Externí odkaz: |
|
