| Autor: |
Kwang Bok Shin, Kwang-Woo Jeon, Taekyung Hwang |
| Rok vydání: |
2012 |
| Předmět: |
|
| Zdroj: |
Journal of the Korean Society of Propulsion Engineers. 16:90-96 |
| ISSN: |
1226-6027 |
| DOI: |
10.6108/kspe.2012.16.3.090 |
| Popis: |
In order to determine optimal design length of adhesive joint of a composite rocket motor case, stress analysis of joint part according to changes of adhesive length was done. Adhesive length has a range of 50 mm to 300 mm as design variables. The ratio of adhesive length without any stress gradient to initial non-stressed adhesive length was determined as evaluation criteria for selection of adhesive length, which called "stress gradient length ratio". The numerical result showed that stress gradient length ratio of joint part with adhesive length of more than 200 mm was increased very slowly with increase of adhesive length. It means that adhesive length of about 200 mm could be the optimal dimension to ensure the structural safety of joint part against internal pressure of 2,500 psi. |
| Databáze: |
OpenAIRE |
| Externí odkaz: |
|
