Characteristics of Fluorine-Doped Tin Oxide Thin Films on Poly Ethylene Terephthalate (PET) Substrate
| Autor: | Ji Hun Park, Yun Ho Kook, Joong Kee Lee, Dongjin Byun |
|---|---|
| Rok vydání: | 2007 |
| Předmět: |
Materials science
Mechanical Engineering Tetramethyltin Analytical chemistry chemistry.chemical_element Substrate (electronics) Chemical vapor deposition Condensed Matter Physics Tin oxide chemistry.chemical_compound chemistry Mechanics of Materials Fluorine Polyethylene terephthalate Organic chemistry General Materials Science Thin film Tin |
| Zdroj: | Materials Science Forum. :949-952 |
| ISSN: | 1662-9752 |
| DOI: | 10.4028/www.scientific.net/msf.544-545.949 |
| Popis: | Fluorine-doped tin oxide (FTO) films on PET (Polyethylene Terephthalate) substrate were prepared by the electron cyclotron resonance-metal organic chemical vapor deposition (ECRMOCVD) under an Ar-O2-H2 atmosphere. The used tin and fluorine precursor are TMT (tetramethyltin) and sulfur hexafluoride (SF6), respectively. The hydrogen content plays an important role to control the optical and electrical characteristics of the films. The HF etching effect was clearly observed with increase of H2/TMT mole ratio, on the other hand the hydro-carbon deposition increased with decrease of H2/TMT mole ratio. Therefore the optimum H2 content can be determined by the counter balance effect between HF etching and hydro-carbon deposition. The obtained optimum SnO2: F thin films exhibited over 90 % of optical transmittance at wavelength range from 380 to 780 nm and c.a. 6×10-3 ohm ·cm of electrical resistivity at 1.25 H2/TMT mole ratio. |
| Databáze: | OpenAIRE |
| Externí odkaz: |
|