Stress redistributions in adhesively bonded double-lap joints, with elastic–perfectly plastic adhesive behavior, subjected to axial lap-shear cyclic loading

Autor: Th. K. Papathanassiou, S. I. Markolefas
Rok vydání: 2009
Předmět:
Zdroj: International Journal of Adhesion and Adhesives. 29:737-744
ISSN: 0143-7496
DOI: 10.1016/j.ijadhadh.2009.04.001
Popis: A shear-lag model is developed in order to evaluate stress redistributions in double-lap joints under axial (tensile) lap-shear cyclic loading. The adherend materials exhibit linear elastic behavior, whereas the material of the adhesive layer satisfies the elastic–perfectly plastic shear stress–strain constitutive relation. The reference state (from which the stresses are redistributed) is based on the standard elastic–perfectly plastic shear-lag analysis for double-lap joints. The main conclusion of the current analysis is that, during unloading, shear stresses of opposite sign may develop in the plastic zones of the adhesive layer, at the ends of the overlap, without reversing the direction of the applied load. A simple model for evaluating the variation of the maximum peel stress in the adhesive layer, based on the variation of the peak shear stress, demonstrates that the sign of peel stresses may alternate, as well. Under cyclic (fatigue) loading, the range of the peak stresses in the adhesive layer is the basic parameter for the evaluation of the variation of the energy release rate and the associated crack growth rate in the overlap. In this framework, the current simplified analysis may provide a reference model for comparisons with experimental data or with results which are based on more complex numerical models. The current model can be readily extended to cover the cases of development of plastic zones in the adhesive layer with shear stresses and plastic strains of opposite sign (during unloading or during load direction change).
Databáze: OpenAIRE