Fluid mixing and flow distribution in the reactor circuit, measurement data base
| Autor: | Y. Bezrukov, J. Elter, T. Toppila, Thomas Höhne, J. Lillington, B. Hemström, Ulrich Rohde, R. Karlsson, Sören Kliem |
|---|---|
| Rok vydání: | 2005 |
| Předmět: |
Nuclear and High Energy Physics
Engineering Buoyancy business.industry Flow distribution Mechanical Engineering Nuclear engineering Base (geometry) Mechanical engineering Computational fluid dynamics engineering.material Coolant Dilution Nuclear Energy and Engineering General Materials Science VVER Safety Risk Reliability and Quality business Waste Management and Disposal Mixing (physics) |
| Zdroj: | Nuclear Engineering and Design. 235:421-443 |
| ISSN: | 0029-5493 |
| DOI: | 10.1016/j.nucengdes.2004.08.045 |
| Popis: | Experimental investigations and computational fluid dynamics (CFD) calculations on coolant mixing in pressurised water reactors (PWR) have been performed within the EC project FLOMIX-R. The project aims at describing the mixing phenomena relevant for both safety analysis, particularly in steam line break and boron dilution scenarios, and mixing phenomena of interest for economical operation and the structural integrity. Measurement data from a set of mixing experiments have been gained by using advanced measurement techniques with enhanced resolution in time and space. Slug mixing tests simulating the start-up of the first main circulation pump are performed with two 1:5 scaled facilities: the Rossendorf Coolant Mixing model ROCOM and the Vattenfall test facility. Additional data on slug mixing in a VVER-1000 type reactor have been gained at a 1:5 scaled metal mock-up at EDO Gidropress. Experimental results on buoyancy driven mixing of fluids with density differences have been obtained at ROCOM and the Fortum PTS test facility. Concerning mixing phenomena of interest for operational issues and thermal fatigue, flow distribution data available from commissioning tests at PWRs and VVER are used together with the data from the ROCOM facility as a basis for the flow distribution studies. In the paper, the experiments performed are described, results of the mixing experiments are shown and discussed. Efforts on computational fluid dynamics codes validation on selected mixing tests applying Best Practice Guidelines in code validation will be reported about in a separate paper. |
| Databáze: | OpenAIRE |
| Externí odkaz: |
|
Full Text from ScienceDirect