Local Flow Behavior of Ceramic Slurries in Tape Casting, as Investigated by Laser-Doppler Velocimetry

Autor: Thomas Betz, Andreas Roosen, Franz Koppe, Michael Svec, Michael Schmidt, Helmut Münstedt
Rok vydání: 2004
Předmět:
Zdroj: Journal of the American Ceramic Society. 85:314-320
ISSN: 1551-2916
0002-7820
DOI: 10.1111/j.1151-2916.2002.tb00090.x
Popis: The local flow behavior in a tape-casting unit for processing ceramic slurries was investigated by laser–Doppler velocimetry (LDV). The most remarkable feature of the LDV system used was its high spatial resolution (24 μm) and temporal resolution (5 μs). A translucent Newtonian model fluid which, in the relevant processing window, at higher shear rates, exhibits a rheological behavior similar to that of a typical ceramic slurry, was chosen to determine the velocity distribution in the flow channel (i.e., in the tape-casting unit). The flow behavior was measured directly in several particular regions of the flow channel, which substantially consisted of a double doctor-blade assembly. The velocity distribution obtained below the forming doctor blade showed the strong influence of the casting speed on the flow behavior of the model fluid. Furthermore, the measured flow behavior was analyzed, based on the assumptions of fluid dynamics. Below the doctor blade, the flow behavior was considered to be a combination of pressure flow and drag (Couette) flow. The flow rates from the applied hydrostatic pressure and external drag forces were shown to be additive. A comparison between the measured velocity profiles and the model calculations showed excellent agreement. A flow reversal (secondary flow), never before measured quantitatively, was detected between the two inserted rectangular blades. Apparently, secondary flows influenced the surface properties of the cast green tapes.
Databáze: OpenAIRE
Externí odkaz: