Green and eco-friendly montmorillonite clay for the removal of Cr(III) metal ion from aqueous environment
Autor: | Hassane Lgaz, Ahmed Lebkiri, S. Marzak, Hanane Essebaai, Awad A. Alrashdi, Amar Habsaoui, El-Housseine Rifi |
---|---|
Rok vydání: | 2021 |
Předmět: |
Langmuir
Environmental Engineering Materials science Fluorescence spectrometry chemistry.chemical_element 010501 environmental sciences 01 natural sciences chemistry.chemical_compound Chromium Montmorillonite Adsorption chemistry Wastewater Chemical engineering Environmental Chemistry Freundlich equation Fourier transform infrared spectroscopy General Agricultural and Biological Sciences 0105 earth and related environmental sciences |
Zdroj: | International Journal of Environmental Science and Technology. 19:2443-2454 |
ISSN: | 1735-2630 1735-1472 |
DOI: | 10.1007/s13762-021-03303-4 |
Popis: | Pollutants found in the wastewater streams of industrial processes such as heavy metals are a significant concern worldwide. Clays are low-cost sorbents that have attracted extensive research interest due to their potential applications in removing heavy metals from wastewater. In this work, montmorillonite clay was collected from the Bengurir region; Morocco was used as an eco-friendly adsorbent for the removal of chromium (III) at various operating conditions. The used adsorbent was characterized using X-ray diffraction, X-ray fluorescence spectrometry, Fourier Transform Infrared Spectroscopy, and scanning electron microscope coupled with X-ray energy dispersion spectrometer analysis. Effects of adsorbent dose, initial concentration, and pH were investigated to optimize the adsorption process. The controlling mechanism and the potential rate-limiting steps were analyzed using Lagergren’s pseudo-first-order and pseudo-second-order models, but the experimental data were better fitted to the pseudo-second-order equation. The equilibrium isotherm data were analyzed by applying Langmuir and Freundlich’s isotherm models, and Langmuir showed good fits with the experimental data. A maximum Cr(III) adsorption capacity of 7.5 mg g−1 was found in the studied conditions. |
Databáze: | OpenAIRE |
Externí odkaz: |