Tribological testing of peroxide cured HNBR with different MWCNT and silica contents under dry sliding and rolling conditions against steel
| Autor: | D. Xu, D. Felhös, József Karger-Kocsis |
|---|---|
| Rok vydání: | 2008 |
| Předmět: |
Tear resistance
Materials science Polymers and Plastics Rolling resistance Young's modulus Fretting General Chemistry Tribology Surfaces Coatings and Films symbols.namesake Natural rubber visual_art Ultimate tensile strength Materials Chemistry symbols visual_art.visual_art_medium Composite material Nitrile rubber |
| Zdroj: | Journal of Applied Polymer Science. 108:2840-2851 |
| ISSN: | 1097-4628 0021-8995 |
| Popis: | The sliding, and rolling friction and wear behaviors of peroxide cured hydrogenated nitrile rubber (HNBR) with 10 and 30 parts per hundred rubber (phr) multiwall carbon nanotube (MWCNT) and silica, respectively, were investigated. Mechanical properties (hardness, tensile modulus, ultimate tensile strength and strain, tear strength) of the rubbers were determined. Dynamic-mechanical thermal analysis was also performed and the apparent crosslink density estimated. Tribological properties were investigated in pin (steel)-on-plate (rubber), with roller (steel)-on-plate (rubber), with oscillating steel cylinder on rubber plate (Fretting) and with rolling ball (steel)-on-plate (rubber) (RBOP) test configurations. Coefficient of friction and specific wear rate (Ws) of the HNBR systems were determined. It was established that the resistance to wear increases with increasing filler content, and the incorporation of MWCNT was more advantageous than silica from the viewpoint of dry sliding and rolling performance. The friction and wear characteristics strongly depended on the test configurations. The worn surface of the HNBR systems was inspected in scanning electron microscope to conclude the typical wear mechanisms which were discussed accordingly. © 2008 Wiley Periodicals, Inc. J Appl Polym Sci, 2008 |
| Databáze: | OpenAIRE |
| Externí odkaz: |
|
Plný text