| Autor: |
Phillip D. Walkington, John H. Gieske, Dennis P. Roach |
| Rok vydání: |
1998 |
| Předmět: |
|
| Zdroj: |
Nondestructive Evaluation of Materials and Composites II. |
| ISSN: |
0277-786X |
| DOI: |
10.1117/12.301516 |
| Popis: |
As part of the FAA's National Aging Aircraft Research Program to foster new technologies for civil aircraft maintenance and repair, use of bonded composite doublers on metal aircraft structures has been advanced. Research and validation of such doubler applications on U.S. certified commercial aircraft has begun. A specific composite application to assess the capabilities of composite doublers was chosen on a L-1011 aircraft for reinforcement of the corner of a cargo door frame where a boron-epoxy repair patch of up to 72 plies was installed. A primary inspection requirement for these doublers is the identification of disbonds between the composite laminate and the aluminum parent material. This paper describes the development of an ultrasonic pulse-echo technique using a modified immersion focus transducer where a robust signal amplitude signature of the composite/aluminum interface is obtained to characterize the condition of the bond. Example waveforms and C-scan images are shown to illustrate the ultrasonic response for various transducer configurations using a boron-epoxy/aluminum skin calibration test sample where disbonds and delaminations were built-in. The modified focus transducer is compatible with portable ultrasonic scanning systems that utilize the weeper or dripless bubbler technologies when an ultrasonic inspection of the boron-epoxy composite doublers installed on aircraft is implemented. |
| Databáze: |
OpenAIRE |
| Externí odkaz: |
|
