The Study on Abrasive Water Jet for Predicting the Cutting Performance and Monitoring the Cutting Situation in the Water

Autor:	Kazuya Sano, Shinichiro Maruyama, Yuji Takashima, Yasuyuki Nakamura, Daisuke Ogane, Shinichi Tezuka, Yoshitugu Morishita
Rok vydání:	2011
Předmět:	Mechanical Engineering Abrasive Energy Engineering and Power Technology Aerospace Engineering Water jet Drilling Mechanical engineering Abrasive water jet Vibration Fuel Technology Nuclear Energy and Engineering High pressure Forensic engineering Environmental science Head (vessel) Visual methods
Zdroj:	Journal of Engineering for Gas Turbines and Power. 133
ISSN:	1528-8919 0742-4795
DOI:	10.1115/1.4002252
Popis:	The abrasive water jet (AWJ), is to shoot the abrasive mixed with high-pressure water to the material for cutting, can cut most materials, such as metals and concretes in water with long stand-off means the length from the cutting head to the material for cutting. On the other hand, AWJ is required to reduce an amount of the abrasive because it becomes the waste. It is also difficult to monitor the cutting condition by any visual methods such as a TV camera in the water becoming cloudy by both used abrasive and cut metal grit. For solving these issues, some cutting tests were conducted and (1) it was possible to predict an optimal supply rate of abrasive by considering the conservation of momentum between the water jet and the abrasive. (2) It was also possible to judge whether the material could be cut successfully or not by detecting the change in the frequency characteristics of vibration or sound caused during the cutting process.
Databáze:	OpenAIRE
Externí odkaz:	https://explore.openaire.eu/search/publication?articleId=doi_________::88134736cf96749a005f7cc951bec9c4 https://doi.org/10.1115/1.4002252 Zobrazit plný text záznamu