Inadvertent Melting of Radioactive Sources in BOF or EAF: Distribution of Nuclides, Monitoring, Prevention
Autor: | Denis Spirin, Lauri Holappa, Dieter Neuschütz, J. Meier-Kortwig, M. A. Heredia Lozano, U. Quade, M. J. Guio Bonany, Marko Hämäläinen |
---|---|
Rok vydání: | 2005 |
Předmět: | |
Zdroj: | ISIJ International. 45:288-295 |
ISSN: | 1347-5460 0915-1559 |
DOI: | 10.2355/isijinternational.45.288 |
Popis: | This report lists the relevant nuclides presently or formerly in use as radiation sources and gives an account of their expected distribution between steel melt, slag, dust and off-gas upon inadvertent meltdown. Three groups of nuclides are identified, namely (a) strong γ-emitters (Co 60, Kr 85, Cs 137, Ir 192), (b) weak γ-emitters (Ra 226, Am 241), and (c) β- and α-emitters (Ni 63, Sr 90, Pm 147, Pu 238/239, and Cm 244). Equilibrium distributions based on thermodynamic calculations and experimental investigations are presented.Combining the equilibrium partition ratios with process-specific effects leads to realistic distribution ratios: The steel melt is expected to contain about 98% of the radioactive Co, Ni, and Ir, while the dust will contain practically all the Cs and about 1% of all the other nuclides except Kr which should completely pass to the off-gas. The slag is expected to contain about 99% of the nuclides Sr, Pm, Ra, Am, Pu and Cm, and about 1% of Co, Ni and Ir dissolved in the suspended metal granules.The strongly γ-emitting nuclides can be, and are increasingly, monitored quasi on-line on steel samples taken in the meltshop and, with respect to Cs, in the baghouse. The respective equipment operates reliably and efficiently. An on-line detection of weak γ-emitters and of α- and β-emitters is technically not possible at present. The steelworks can minimize the risks connected to the inadvertent melt-down of a radioactive γ-source by introducing three consecutive steps of measures: Prevention by inspection of incoming materials; Inhouse Scrap Monitoring by inspection during transport, and finally Product Control by monitoring of steel samples and in the bag-house. |
Databáze: | OpenAIRE |
Externí odkaz: |