MAGNETOELECTRIC VALVE MOTORS WITH TOOTHED MULTI-POLE WINDINGS BASED ON 6DVM 300

Autor: Aleksandr A. Afanasyev
Rok vydání: 2022
Předmět:
Zdroj: Vestnik Chuvashskogo universiteta. :21-34
ISSN: 1810-1909
DOI: 10.47026/1810-1909-2022-3-21-34
Popis: The paper considers valve motors with toothed windings with pole numbers 2, 4, 6, 8, the main dimensions of which correspond to the 6DVM 300 valve motor manufactured by JSC “Cheboksary electrical apparatus plant”. This approach allows us to evaluate the effect of the number of stator teeth on the electromagnetic moment and its harmonic composition. The three adjacent coils of the toothed windings in question belong to three different phases. The paper analyzes the MMF of the windings and magnets of the rotor. The distribution of magnetic induction in the gap, the EMF of the stator winding and the electromagnetic moment are found based on the method of the specific magnetic conductivity of the gap. It is shown that the MMF curve of the stator winding consists of two multipolar rectangles of unequal height and width. Due to the non-sinusoidal distribution of magnetic field sources and the jagged inhomogeneity of the air gap, the curves of the phase EMF of the stator winding are also significantly non-sinusoidal. It is found that with an increase in the number of poles (from 2 to 8 poles) of the stator winding, the maximum induction in the air gap decreases from level 1 to 0.75 Tl, the average value of the electromagnetic moment increases from 120 to 160 Nm, the amplitude of the phase EMF remains unchanged, and the maximum (height of the rectangle) of the MMF of the stator winding is reduced from 2000 to 500 A.
Databáze: OpenAIRE