Autor: |
Ivan Siu-Chuang Lu, George Chien, Hsiang-Hui Chang, Sheng-Jui Huang, Chih-Chun Tang, Tzung-Han Wu, Chinq-Shiun Chiu, Lan-Chou Cho, Chi-Yao Yu, Chih-Hao Sun, Yen-Horng Chen, Wen-Chang Lee |
Rok vydání: |
2011 |
Předmět: |
|
Zdroj: |
IEEE Journal of Solid-State Circuits. 46:3047-3060 |
ISSN: |
0018-9200 |
DOI: |
10.1109/jssc.2011.2166657 |
Popis: |
A quad-band GSM/GPRS/EDGE receiver, implemented in 65 nm CMOS, complies with the ETSI standard without the need of external SAW filters. By exploring the properties of passive mixers and current-mode operation from RF to baseband, the receiver can achieve a SAW-filter-like selectivity with inexpensive on-chip components such as resistors and capacitors. In addition, to alleviate the linearity bottleneck at the LNA input stage, Class-AB self-bias LNTA is employed to break the conventional trade-off's among NF, linearity and power consumption. For single-to-differential conversion, external LC-CL baluns (instead of on-chip baluns) are used to balance the on-chip die and external BOM cost. This receiver solution is embedded as a part of a cellular phone SoC and achieves ; +1 dBm Out-of-Band Pι dB and consumes 58.9 mA. In FTA test, the receiver passes out-of-band blocker test with >; 4 dB margin. |
Databáze: |
OpenAIRE |
Externí odkaz: |
|