| Autor: |
K. Ashenayi, J.F. Lea, G.M. Nazi, Frank Kemp |
| Rok vydání: |
1994 |
| Předmět: |
|
| Zdroj: |
SPE Computer Applications. 6:9-14 |
| ISSN: |
1064-9778 |
| Popis: |
Abstract Beam pumping is the most frequently used artificial lift technique. Down hole pump cards are used to evaluate performance of the pumping unit. Pump cards can be generated from surface dynamometer cards using one-dimensional wave equation with viscous damping, as suggested by Gibbs. Pump cards contain significant information describing the behavior of the pump. However, interpretation of these cards is very tedious and time consuming. Hence, an automated system capable of interpreting these cards is very useful. This work presents a DOS based computer program capable of correctly classifying pump cards. The program uses a hybrid artificial neural network (ANN) to identify significant features of the pump card. The hybrid ANN utilizes classical and sinusoidal perceptrons. The network is trained using error back propagation technique. The program has been able to correctly identify problems in over 100 different training and test pump cards. The ANN requires total of 80 data points as input. Sixty data points are collected from the pump card perimeter itself and the remaining 20 data points represent the slope at selected points on the pump card perimeter. The problem conditions are grouped into distinct classes such as malfunction anchor tubing, fluid pound, gas interference, and worn traveling valve. The network is capable of identifying one or more of these problem conditions for each pump card. Several examples will be presented and discussed. Introduction Sucker-rod pumping system is a very popular means of providing artificial lift for wells. It is estimated that 90 percent of artificially lifted wells use sucker-rod pumping systems. In order to assure proper operation of these systems it is necessary to monitor them on a regular basis. This is done by means of a dynamometer which is attached to the polished rod of the pumping unit. The plot of load versus position generated by the dynamometer is known as a surface card. Using the technique proposed by Gibbs this surface card can be used to obtain down hole "pump card". The pump card presents the load versus position at the pump down hole instead of the load versus position at the polished rod on the surface. The shape of the pump card can be used as a diagnosis tool. For example, when the pump is functioning properly and pumping to its full capacity the pump card will have a rectangular shape. When the pump capacity is not being fully utilized then we may have a condition called "fluid pound". The petroleum industry is in the process of automating the control of pumping wells. Computers are being used to continuously monitor the pump and transmit data to a central office for further analysis. The shear volume of data received makes it necessary to develop tools for automatic analysis of the pump cards. Various pattern recognition techniques have been used to analyze the down hole pump card. Traditional techniques require significant processing time. P. 151^ |
| Databáze: |
OpenAIRE |
| Externí odkaz: |
|
