Numerical simulation of the effect of chimney configuration on the performance of a solar chimney power plant
Autor: | Ben Horan, Mazdak Arzpeyma, Mehdi Seyedmahmoudian, Bobby Mathew, Kazi Md. Salim Newaz, Naveed Akram, Fadi Alnaimat, Saad Mekhilef, Alex Stojcevski |
---|---|
Rok vydání: | 2021 |
Předmět: |
Computer simulation
Power station Solar chimney Turbulence business.industry 02 engineering and technology Computational fluid dynamics 021001 nanoscience & nanotechnology Condensed Matter Physics 01 natural sciences Wind speed 010406 physical chemistry 0104 chemical sciences Chimney Physical and Theoretical Chemistry 0210 nano-technology business Marine engineering Crosswind |
Zdroj: | Journal of Thermal Analysis and Calorimetry. 147:2549-2563 |
ISSN: | 1588-2926 1388-6150 |
DOI: | 10.1007/s10973-021-10567-y |
Popis: | Previous studies have shown that the crosswind reduces the output power of a SCPP (solar chimney power plant) with the deflection of the plume at the exit and separation of wind flow there at the downstream. The present numerical investigation was focused on the effect of the stack configuration on the performance of a SCPP. In this paper, the SCPP of the prototype in Manzanares was simulated, where the Boussinesq approximation was used for solving the continuity, Navier–Stokes and energy equations by the standard k-epsilon turbulence model in finite volume method. Governing parameters are taken as oblique angles from 27° to 45° and wind velocity from 0 to 10 m s−1. Investigation revealed that by changing the stack configuration, the performance of the SCPP could be improved. Numerical simulation of the conventional chimney was compared with the simulation data of the proposed altered chimney geometry (outlet bevel cutting) and observed that the throttling effect on the outlet of the chimney could be reduced. It was noticed that by changing the chimney oblique angle from 27° to 45°, the efficiency of the power plant was dropped. Further, the results illustrated that the oblique angle relies on the wind velocity and it needs to increase with the increase in the wind velocity to obtain a reasonable change in power output. The present investigation was further enhanced to incorporate a comparison of solar chimney power output in two cities (Kuala Lumpur and Kerman) for a better understanding of the effect of environment on constructing the solar tower power plant. The result shows that Kuala Lumpur is appropriated for the installation of SCPP although, the Kerman is suitable too, but the wind velocity in that city is higher than that in Kuala Lumpur. |
Databáze: | OpenAIRE |
Externí odkaz: |