| Autor: |
Pin-Ning Wang, Ming-Hsiung Ho, Jung-Peng Yeh |
| Rok vydání: |
2017 |
| Předmět: |
|
| Zdroj: |
AIP Conference Proceedings. |
| ISSN: |
0094-243X |
| Popis: |
The Aluminum alloy had been applications in many areas. In this study, the models with four type’s cross-section were designed and analyzed. Analyses of the use of aluminum alloy materials are 5086-H32, 6061-T6, 7005-T6 and 7075-T6. The materials selected are based on the recommendations of the casting plant. The boundary conditions are set according to the actual conditions of use. Force and torsion are used to apple on models under different conditions. The results of stress and deformation are discussed. The stress results were shown that 40x80 model with hollow cross-section under two end fixed middle beam load had the highest stresses of 41.177 MPa nearby fixed end position. The beam model of 40x80 hollow cross-section under boundary condition of one end fixed and one end force load like a cantilever beam has the maximum deformation 1.587 mm. |
| Databáze: |
OpenAIRE |
| Externí odkaz: |
|
