Non-linear models for steel–concrete epoxy-bonded beams
Autor: | C. Meaud, Emmanuel Ferrier, Bruno Jurkiewiez |
---|---|
Rok vydání: | 2014 |
Předmět: |
Materials science
business.industry Metals and Alloys Building and Construction Structural engineering Epoxy Finite element method Mechanics of Materials Deflection (engineering) Precast concrete visual_art Slab visual_art.visual_art_medium Shear stress Composite material business Failure mode and effects analysis Beam (structure) Civil and Structural Engineering |
Zdroj: | Journal of Constructional Steel Research. 100:108-121 |
ISSN: | 0143-974X |
DOI: | 10.1016/j.jcsr.2014.04.005 |
Popis: | The main objective of this article is to propose and validate two non-linear models suited for steel–concrete epoxy-bonded composite beams: the first is a multi-layered beam model, and the second uses a finite element model (FEM). We first completed experimental data available in the literature for test results on a steel–concrete beam. In this study, the slab consisted of both a precast part and a part that had been cast in-situ. The test results indicate that a beam fabricated in this way behaves similarly to beams made of steel–concrete with studs and significant ductility. The results from the proposed models were later compared to the aforementioned tests results, as well as to the measurements of four other steel–concrete epoxy-bonded composite beams discussed in the literature that were made from different materials and were constructed using varying methods. For all five beams, both models provided numerical results close to the measurements for the failure load and failure mode, deflection and strain. The state of stress and the damage were analysed, and these results also support the observed results. In particular, these findings show that the shear stress along the bonding joint is neither uniform within the width of the concrete slab nor constant along the span. |
Databáze: | OpenAIRE |
Externí odkaz: |
Pro tento záznam nejsou dostupné žádné jednotky.