Elastic properties of Ni and Ni+Mo coatings electrodeposited on stainless steel substrate
| Autor: | M. Kubisztal, J. Rasek, Antoni Budniok, Artur Chrobak, Julian Kubisztal, Grzegorz Haneczok |
|---|---|
| Rok vydání: | 2008 |
| Předmět: |
Materials science
Adhesion coefficient Modulus Young's modulus Surfaces and Interfaces General Chemistry engineering.material Condensed Matter Physics Layer thickness Surfaces Coatings and Films symbols.namesake Composite coating Coating Materials Chemistry engineering symbols Elasticity (economics) Composite material Elastic modulus |
| Zdroj: | Surface and Coatings Technology. 202:2292-2296 |
| ISSN: | 0257-8972 |
| DOI: | 10.1016/j.surfcoat.2007.07.057 |
| Popis: | Adhesion coefficient and Young's modulus of Ni and Ni + Mo coatings electrochemically deposited on stainless steel were examined by applying vibrating reed technique. It was shown that adhesion coefficient of the Ni coating slightly decreases (about 8%) with increasing layer thickness (5–40 μm). Young's modulus E f of these coatings at room temperature was found to be about 130 GPa. The relative adhesion coefficient of the Ni layer decreases with increasing temperature (300–600 K) in relation to the thinnest examined layer (5 μm). Young's modulus of the Ni + Mo coatings decreases with increasing Mo content; for 9 wt.% of Mo E f = 40 GPa and for 32 wt.% of Mo E f = 23 GPa. |
| Databáze: | OpenAIRE |
| Externí odkaz: |
|
Full Text from ScienceDirect