Modulation transfer function in the analysis of electro-optical system performance
| Autor: | Branko Livada, Dragana Peric, Milan Milosavljević, Nedeljko S. Pađen |
|---|---|
| Rok vydání: | 2020 |
| Předmět: |
Physics
Test target Linear system 02 engineering and technology Spectral bands 01 natural sciences Cutoff frequency 010309 optics 020210 optoelectronics & photonics Control theory Optical transfer function 0103 physical sciences System parameters 0202 electrical engineering electronic engineering information engineering Systems design Limit (mathematics) |
| Zdroj: | Vojnotehnicki glasnik. 68:572-597 |
| ISSN: | 2217-4753 0042-8469 |
| DOI: | 10.5937/vojtehg68-26985 |
| Popis: | Introduction/purpose: The Modulation Transfer Function (MTF) is a useful tool for an imaging system performance analysis. It is used in Electro-Optical (EO) system design, verification of targeted system parameters, but also in optimization tasks for systems under test. This methodology based on the linear systems theory allows the performance analysis of complicated EO systems to be divided into subsystems. In this paper, the MTF methodology will be presented and explained, followed by the measurements performed in the electro-optical laboratory. The MTF measurements were performed on three types of cameras spectral bands, after which the results were compared to in different the model expectations and theoretical limits for the imaging system. For one of the sensors, the limiting frequency was also measured using the USAF 1951 test target which allowed the comparison between the methods. Methods: Laboratory measurements and theoretical mathematical calculations. Results: Based on the laboratory and theoretical results, the measurement results were further analyzed. Conclusion: The measurements have proven that the calculated cutoff frequency and the MTF curve represent the limit for the real measured system performance. Therefore, this study has confirmed that the MTF can be convenient for finding system limitations and bottlenecks and for increasing the overall performance of the system. |
| Databáze: | OpenAIRE |
| Externí odkaz: |
|