Characterization of Via Etching in CHF3/CF4Magnetically Enhanced Reactive Ion Etching Using Neural Networks
Autor: | Jong Moon Park Park, Kun Sik Park Park, Byung Whan Kim Kim, Yoon Kyu Kyu, Seong Wook Yoo, Kwang Ho Kwon Kwon, Sung Ku Kwon Kwon |
---|---|
Rok vydání: | 2002 |
Předmět: |
Plasma etching
Materials science General Computer Science Analytical chemistry Oxide chemistry.chemical_element Nanotechnology Plasma Electronic Optical and Magnetic Materials chemistry.chemical_compound chemistry Etching (microfabrication) Gas composition Electrical and Electronic Engineering Reactive-ion etching Tin Selectivity |
Zdroj: | ETRI Journal. 24:211-220 |
ISSN: | 1225-6463 |
DOI: | 10.4218/etrij.02.0102.0305 |
Popis: | This study characterizes an oxide etching process in a magnetically enhanced reactive ion etching (MERIE) reactor with a CHF 3 /CF 4 gas chemistry. We use a statistical 2 4-1 experimental design plus one center point to characterize the relationships between the process factors and etch responses. The factors that we varied in the design include RF power, pressure, and gas composition, and the modeled etch responses were the etch rate, etch selectivity to TiN, and uniformity. The developed models produced 3D response plots. Etching of SiO 2 mainly depends on F density and ion bombardment. SiO 2 etch selectivity to TiN sensitively depends on the F density in the plasma and the effects of ion bombardment. The process conditions for a high etch selectivity are a 03 to 0.5 CF 4 flow ratio and a -600 V to -650 V DC bias voltage according to the process pressure in our experiment. Etching uniformity was improved with an increase in the CF 4 flow ratio in the gas mixture, an increase in the source power, and a higher pressure. Our characterization of via etching in a CHF 3 /CF 4 MERIE using neural networks was successful, economical, and effective. The results provide highly valuable information about etching mechanisms and optimum etching conditions. |
Databáze: | OpenAIRE |
Externí odkaz: |